|
|
|
Used Equipment Used equipment ads will be posted for one month. If you wish your ad to appear for longer than that period of time (or reposted after it has been removed), please contact Linda Whitworth, 1.877.375.1330. |
||
|
Equipment for Sale |
Equipment Wanted |
|
|
25 Each Rainbird 1230 Field Controller Clock Panels No charge to anyone who can use them. Call Alan Nielsen at Royal Oaks |
  |
|
|
Mill Creek Topdresser. Near new condition; no sign of wear; faded paint only. 3000 lbs, 2 yds capacity. 25 hp needed to operate. $3750 Contact: Tim Doyle at 360.261.3538 Posted 8.1.11 |
|
Used Ball Washers Contact: |
|
A ranch owner or Harley owner's dream tool box. Asking $15,000. I can provide a complete inventory list to serious parties. I have a Snap-On KR7100A (chuck full, hence the side cab purchase) w/ 290A side cab (which is empty) that's been idle in my garage ever since I started with the City of Portland in ' 93 (they wouldn't insure them). It was put together with golf course grooming equipment maintenance in mind, which I've been at for 30yrs+. It has everything from 1/4" drive up to 3/4" drive, screwdrivers, pliers of many types, flex-sockets, measuring tools, several diagnostic items like photo-tach and timing light, cutting & threading eq., hydraulic wrenches...I could go on and on... I'll let the pics do the talkin'. In the locker are several punches and pry bars in addition to hot glue gun, several air tools and such. Many of the items have never seen a screw, nut or bolt. This would be the wealthy Harley owner or ranch owner's dream set. Included are a creeper and scooter... both of which are in the same excellent-to-new condt. that everything else is in. There's also a creeper hanger I've never mounted and the cover for the main rollaway. I do not intend to let it go for much less than $20,000 total as most of what is in it is near to new. It's a mix of Craftsman and Snap-On... the latter where it counts most... the ratchets, flex-sockets (some), the hydraulic wrenches, wobble drives, & the U.S. flank drive wrenches - of which there are two each from 3/8" up to 3/4"....as many times you're usin' two of them at the same time. CONTACT: Steve Closs |
||
|
Top locker: Odd items like timing light, knives, micro-torch fuel, etc. |
 |
|
|
1st level: screwdrivers LH=slotted w/driver bits for 1/4" & 3/8" , C= 1/4" drive tools, RH= phillips w/ bits |
 |
|
|
2nd level: LH= measuring , RH= flex-sockets 1/4" & 3/8" drive |
 |
|
|
3rd level: Pliers, vise grips, snap ring & other specialty pliers |
 |
|
|
4th level: L to R (back to front) L= Std. ratcheting box, tappet wrench, Std. offset ratcheting box C= Std. hydraulic wrenches, metric line wrenches, Std. line wrenches R= metric racheting box, ratcheting sq.drive, metric offset ratcheting box |
 |
|
|
5th level: (back to front) 3/4" drive tools, 1/2" drive tools, 3/8" drive tools |
 |
|
|
6th level back: 1/2"dr. torque wrench, 3/8" torque wrench with: (laid atop work surface: digital photo tach, Fluke99 digital multimeter, valve spring compressor |
 |
|
|
6th level inside: Many specialty items... 2 types of tappet oil deflector clip sets, clutch drive set, valve lapping tool, stud puller, carburetor adjuster tools (2), seal puller, cotter pin extractor, window trim tool, valve lifter puller, micro-torch (on side) and several other items I can't recall or make out in the photo |
 |
|
|
7th level: Just about every socket from 1/4"drive to 1/2" drive you can dream up, shallow and deep. Stud installer socket set, 6 & 12pt. in metric and std. in all drives ...8pt as well, stud extractor, socket magnets, and 1/2" air wrench drill chuck, air drive sockets in 1/2" & 3/8"dr. ...socket organizer that's no longer available (LH side of drawer) |
 |
|
|
8th level: Std wrenches... LH- box & box-socket, C- tappet & short box, RH- combination..mostly 2ea flank drive |
 |
|
|
9th level: Rear tray= L to R- 3/8"dr. metric crow's feet & ignition wrench sets, large slip joint pliers and Std. 3/8"dr. crow's feet. In drawer= L to R - medium crescent wrench, then metric box working into small metric combos, center is small crescent wrench then metric combination wrenches and finally large crescent wrench. |
 |
|
|
10th level: In tray: 1/4" & 3/8" dr. socket head drivers (allen drivers)- metric at left and wobble head long drives at ctr, then Std. at right also bagged sets of Hex keys in metric and Std. In drawer L to R fr to bk...Impact driver 3/8", metric nut runners, metric open end wrenches, special wrench, 3/4" shallow sockets, Std. open end wrenches, Std. nut runners |
 |
|
|
11th level: Back= L- Std. thread cutting, R- metric thread cutting, working l to r and back to front ...Strap wrench, thread file (barely visible-black), window knife, alum. file (under... ) hacksaw, wire brushes, utility knife & hacksaw blades, small - medium & large pipe wrenches, round & triangular files, flat files In center is: cutter wheels and abrasives for Moto-tool, gasket scraper & blades, T-handle reamer |
 |
|
|
Locker: Several pry bars, set punches& chisels, 3/8" air wrench, long barrel air hammer, hot glue gun, Moto-tool, 3/8" arbor disc grinder, drop light, die grinder, hammers- claw, ballpene & plastic/rubber heads, 3/8" air drill |
 |
|
|
Loose: Creeper, Scooter and creeper hanger |
 |
|
|
Agri Metal Rollers $1000 for all three. Fits on Jacobsen Triplex mower and can be used on other triplex mowers with additional kits Tom Baty 541.382.1083 bgccsuper@hughes.net or cgsuper@bendgolfclub.com Posted 3.12.10 |
 |
|
|
1997 John Deere 3215-A Fairway mower with 4293 hours. $1500 (Price reduced) Please contact Rusty or Kevin Posted 12.3.10 |
 |
|
|
3-11 Blade Groomer Reels for Greens 3-7 Blade Reels for Tees $100 per reel or $550, takes all 6 Please contact Rusty or Kevin Posted 12.3.10 |
 |
|
|
Push Blower with Kohler 8 hp engine Make offer Contact Ryan Benson at watsonranchgolf@charterinternet.com Posted 1.5.10 |
 |
|
|
Cushman 3-wheel Turf Truckster Brakes need work, but strong machine. 4711 hours—make offer Contact Ryan Benson at watsonranchgolf@charterinternet.com Posted 1.5.10 |
.jpg)
|
|
|
Jackbson GK IV Great parts machine. Includes cutting units and rollers. Engine leaks oil. Contact Ryan Benson at watsonranchgolf@charterinternet.com Posted 1.5.10 |
 |
|
|
Cushman GA60 Missing two pulley, otherwise runs good. Make offer. Contact Ryan Benson at watsonranchgolf@charterinternet.com Posted 1.5.10 |
 |
|
|
Ransome Fairway/Rough Mower 4032 gentle hours. Does need reels, bedknives and battery. Incredibly solid engine. Convert to bio and go green. $750 or an interesting offer will take it home. Contact Skamania Lodge Golf Course PH#: 509.427.2542 Email: swatts@destinationhotels.com posted 5.8.09 |
 |
|
.jpg)